This BECKSON TWIST-OUT PLATE DP50W has been designed to conceal the mounting fasteners under a quick-twist cover. The BECKSON TWIST-OUT PLATE DP50W is a low-profile self-centering deck plate which quickly locks into place. Its three separate sealing areas are designed to catch water from the plate opening ensures a watertight closure. Each plate has a non-jamming self-cleaning bayonet thread - just twist and lift the centre for simple removal. Beckson's innovative 5″ deck access plate is perfect for non-load-bearing areas with no foot traffic, and for a clean, modern look on a bulkhead.

Description

This BECKSON TWIST-OUT PLATE DP50W has been designed to conceal the mounting fasteners under a quick-twist cover. The BECKSON TWIST-OUT PLATE DP50W is a low-profile self-centering deck plate which quickly locks into place. Its three separate sealing areas are designed to catch water from the plate opening ensures a watertight closure. Each plate has a non-jamming self-cleaning bayonet thread – just twist and lift the centre for simple removal. Beckson’s innovative 5″ deck access plate is perfect for non-load-bearing areas with no foot traffic, and for a clean, modern look on a bulkhead.

Specifications:

OD: 7”
ID: 5”
Hole cut-out: 5-1/2”.

Beckson Marine:

In 1955, Beckson was founded to manufacture the first dependable, self-priming, all plastic bilge pumps. The use of plastics for marine products was limited, although the advantages of reduced weight, low maintenance, high impact strength, cost reduction and corrosion resistance were beginning to be recognized. By the 70’s, plastic had become “state-of-the-art” in the marine industry, eliminating problems of electrolysis, corrosion, lubrication, maintenance, and annual repainting. Plastic also eliminated problems associated with thru-mounted metal parts which cause condensation, stain surfaces, and suffer from material deterioration of the metal.

The need for an access plate to enable deck mounting the original 519C pump led to the design and production of the “first” pop-out deck plate. Thus, eliminating the need for the spanner wrench necessary to open threaded metal models. Further developments in deck plate design led to the first use of an extra heavy, self-cleaning buttress thread in Beckson screw out models. Perhaps our greatest contribution to the marine industry has been the extensive research leading to the design of our patented line of hatches and opening ports, the Vent-O-Mate® exhaust ventilator, and air scoops which abate condensation and mildew.

Notice: Please do not hesitate to ask if it is in stock before purchasing.

Stones Boatyard
The Marine Store@Stones Boatyard
Beckson Marine