VICTRON BLUESOLAR CHARGE CONTROLLER MPPT 150/60

Description

The VICTRON BLUESOLAR CHARGE CONTROLLER MPPT 150/60 gets connected between the photovoltaic modules and the batteries allowing the product to increase energy harvest out of the modules as efficiently as possible. The VICTRON BLUESOLAR CHARGE CONTROLLER MPPT 150/60 has an ultra-fast Maximum power point tracking (MPPT) controller that improves the energy harvest by 30% compared to PWM controllers and by up to 10% compared to the slower MPPT controllers. Especially in the clouded sky when the light intensity is changing continuously.

The Victron BlueSolar Charge Controller uses the advanced Maximum Power Point Detection in cases of partial shading conditions. at times of partial shading happens two or more maximum power points can be presented on the power-voltage curve. Conventional MPPTs tend to lock to a local Maximum Power Point (MPP), which may not be optimum; however, the innovative BlueSolar algorithm will always maximize the energy harvest by locking to the optimum MPP.

Key Features 

• Bluetooth Smart built-in – The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
• Ultra-fast Maximum Power Point Tracking (MPPT) – Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast. MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
• Advanced Maximum Power Point Detection in case of partial shading conditions – If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
• Outstanding conversion efficiency – No cooling fan. Maximum efficiency exceeds 98 %.
• Flexible charge algorithm – Fully programmable charge algorithm (see the software page on Victron’s website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
• Extensive electronic protection – Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
• Internal temperature sensor – Compensates absorption and float charge voltage for temperature.
• Optional external battery voltage, temperature and current sensing via Bluetooth – A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
• Synchronized parallel charging with Bluetooth – Up to 10 units can be synchronized with Bluetooth.
• Fully discharged battery recovery function – Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
• VE.Direct – For a wired data connection to a Color Control GX, other GX products, PC or other devices
  Remote on-off – To connect for example to a VE.BUS BMS.
• Programmable relay – Can be programmed to trip on an alarm, or other events.
• Optional: SmartSolar pluggable LCD display – Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

Victron Energy

Our products include sinewave inverters, sinewave inverter/chargers, battery chargers, DC-DC converters, transfer switches, battery monitors and more. Victron Energy has a strong, unrivalled reputation for technical innovation, reliability, and build quality. Our products are widely considered to be the professional choice for independent electric power.

Stones Boatyard Ltd
Stones Boatyard Marine Store
Victron Energy MPT 150/60 Datasheet