RULE 500GPH AUTO BILGE PUMP 25SA

Description

The RULE 500GPH AUTO BILGE PUMP 25SA delivers dependable performance with a “smart” design. Moreover, the impeller provides greater flow at the same amperage, and the built-in thermal cut-off (TCO) provides added protection for both the pump and boat. An internal computer chip cycles pumps on every 2 1/2 minutes (runs for 1/2 second) and shuts pump off if no water detected.

This RULE 500GPH AUTO BILGE PUMP 25SA boasts “smart” operation, with an internal computer chip that cycles it on every 2 1/2 minutes, then quickly shuts it down if no water is detected. Capacity is at an honest 12V rather than 13.6V. It means that you get the capacity you are paying for in real world pumping situations. Convenient features include bases that detach to make clearing debris easy, and screw-on ports that ease installation. In addition, pumps are completely submersible, rustproof, corrosion-proof and ignition-protected. The 750mm of three-way cables enables connection to a switch for manual override or indicator light.

Features

• Back flow prevention reduces the amount of water left over in the bilge
• Hidden air vents in the body helps prevent air locks
• Threaded discharge for easier installation and maintenance
• Built-in strainer bases snap off to make cleaning easy
• Completely submersible, rustproof, corrosion-proof and ignition-protected
• Three-way wiring enables connection to a switch for manual override or indicator light
• Rated flow is at 12V vs. 13.6V
• Connections: For 3/4″/19mm bore hose.
• Dimensions: 107mm high, 64mm x 74mm.
• Current Draw: 1.6 Amp. s Low amp draw conserves batteries.
• Fuse Size: 4 Amp
• Output: Up to 7 gallons/31 litres/minute  at 12v, without check valve.
• Max. recommended discharge head 2m.
• Fully automated bilge pump with computerised operation.
• Tough plastic body with integral strainer.
• No Need for separate float switch, third wire for manual override.
• Base not interchangeable with old range but can be fitted to existing screw holes

Rule is a worldwide leading manufacturer of pumps, switches, and various accessories for the recreational marine market that are available globally at local marine dealers and marine retailers. Rule is able to draw on 50 years of experience. They are constantly developing new and better solutions to help keep your bilge dry. Their new small bilge pump range provides the ultimate pumping performance, now more efficiently than ever, delivering full rated flow at just 12 volts instead of 13.6.

The Marine Store@Stones Boatyard
Rule: the standard amongst bilge pumps
Rule pumps for boats