RULE 900GPH LO-PROFILE AUTO BILGE PUMP LP900S

$139.99

The RULE 900GPH LO-PROFILE AUTO BILGE PUMP LP900S is designed to bring pumping power to tight spaces, Rule’s LoPro Series Bilge Pumps are only 2.4″ (6cm) high. The LP900S model features two automated modes. The first one engages the pump when the water level reaches 2″/5cm or 1.3″/3.25cm (user choice); and the second one checks for water by briefly turning on the pump every 2-1/2 minutes. The RULE 900GPH LO-PROFILE AUTO BILGE PUMP LP900S model uses a traditional float and/or panel switch for operation. The pump has a 900 gallons per hour capacity.

1 in stock

The RULE 900GPH LO-PROFILE AUTO BILGE PUMP LP900S is designed to bring pumping power to tight spaces, Rule’s LoPro Series Bilge Pumps are only 2.4" (6cm) high. The LP900S model features two automated modes. The first one engages the pump when the water level reaches 2"/5cm or 1.3"/3.25cm (user choice); and the second one checks for water by briefly turning on the pump every 2-1/2 minutes. The RULE 900GPH LO-PROFILE AUTO BILGE PUMP LP900S model uses a traditional float and/or panel switch for operation. The pump has a 900 gallons per hour capacity.

Description

The RULE 900GPH LO-PROFILE AUTO BILGE PUMP LP900S is designed to bring pumping power to tight spaces, Rule’s LoPro Series Bilge Pumps are only 2.4″ (6cm) high. The LP900S model features two automated modes. The first one engages the pump when the water level reaches 2″/5cm or 1.3″/3.25cm (user choice); and the second one checks for water by briefly turning on the pump every 2-1/2 minutes. The RULE 900GPH LO-PROFILE AUTO BILGE PUMP LP900S model uses a traditional float and/or panel switch for operation. The pump has a 900 gallons per hour capacity.

Features:

  • Multiple modes of operation. The LP900S features two automated modes
    of operation.
  • High or low water sensing mode. The pump starts when water reaches 2″/5cm. By turning the motor cartridge upside down, the sensor is at 1.3″/3.25cm
  • Electronic automatic mode. The pump automatically turns on every 2-1/2 minutes to check for water, and if it’s detected, the pump stays on until the water is gone.
  • Fully rotating discharge body. The entire body swivels up to 180º, making for an easy plumbing installation.
  • Threaded discharge nozzle. Multiple ports are available for this pump: 3/4″/19mm straight, 3/4″/19mm right angle, 1″/25mm and 1-1/8″/28mm.
  • All ports are included in the aftermarket package.
  • New tricuspid check valves help prevent backflow.
  • Horizontal or vertical mounting. The LP900S  features a variety of mounting options to accommodate a boat’s bilge
  • Height 2.4″/60mm, Width 2.4″/60mm, Length 7.12″/180mm
  • Use panel switches 43, 45, 35A, 37A, 40A

Rule is the world’s leading brand for submersible bilge pumps, drawing on 50 years of experience. We are constantly developing new and better solutions to help keep your bilge dry. Our new small bilge pump range provides the ultimate pumping performance, now more efficiently than ever, delivering full rated flow at just 12 volts instead of 13.6. Rule Submersible Bilge Pumps have set the standard for the industry for decades. They are the first choice of yachtsmen and fishermen throughout the world. More  innovations in bilge pump design have come from Rule Industries than any other manufacturer, and we are proud to offer the broadest range of bilge pumps in the world.

Notice: Please do not hesitate to ask if it is in stock before purchasing. 

The Marine Store@Stones Boatyard
Stones Boatyard
Rule pumps for boats
Rule: the standard amongst bilge pumps

Additional information

Weight 0.723 kg
Dimensions 29.5 × 9.5 × 21.5 cm
More
Our Preferred paint partner
Contact Us
Intouch
Stones Boatyard and The Marine Store
104-1840 Stewart Ave Nanaimo, BC, V9S4E6 Canada
Phone: 1-250-716-9065 Email: info@nanaimoboatyard.ca
Newsletter
© 2024 Nanaimo Boat Yard & Chandlery All rights reserved.