RULE-MATE 2000GPH AUTO BILGE PUMP RM2000A

Description

This RULE-MATE 2000GPH AUTO BILGE PUMP RM2000A is a fully automated bilge pump with solid state water reacting technology removing the need for a separate float switch. It can move 2000 gallons per hour. The sensor’s unique “field effect” technology is eco-friendly because straight motor oil in the bilge will not turn on the pump.

The new RuleMate bilge pumps operate using an internal level sensor. The RULE-MATE 2000GPH AUTO BILGE PUMP RM2000A switches on when the water level reaches 2″/5cm, and the pump will automatically activate, removing water from the bilge. When the water level reaches 3/8″/0.9cm the pump will turn off until the water level rises again. 

RuleMate bilge pumps provide ultimate pumping performance, which helps keep your bilge clear water.

However, bilges are not always clean and free from debris. If the level sensor becomes fouled by debris or contaminated water, RuleMate’s unique back up feature will prevent the pump from entering a run-on condition, protecting the battery while maintaining automatic operation. It has embedded programming that can sense when the pump is working but not pumping water to protect the pump, vessel, and the boat’s batteries.

Each pump includes a straight 1″/25mm & 1 1/8″/28mm NPSM and hose barb, a snap-on strainer for easy cleaning, and an anti-fouling impeller. These pumps have a 3-year limited warranty.

Features:

• Higher flow – the 2000GPH pump has an optimized impeller to provide up to 10% more flow at the same amperage
• Auto sense intelligence – integral water level sensor controls the pump automatically
• Back-up feature – prevents continuous running if sensor is fouled by debris, pump reverts to 2.5 minute cycle mode
• Built-in Thermal Cut-Off (TCO) – provides added protection for the pump and the boat
• Back flow prevention – reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner
• Hidden air vents in the body – helps prevent air locking in challenging plumbing installations and helps with the check valve
• Threaded discharge – easier installation, easier maintenance
• Capacity: 2000 GPH
• Volts: 12DC
• Amp Draw: 1.8 Amps at max flow
• Fuse size: 15 Amps (not included)
• Size: 6″/150mm Height x 4.25″/110mm, Width (not including discharge) x 6″/150mm Depth
• Port Size: 1″/25mm & 1 1/8″/28mm NPSM and hose barb

Rule is the world’s leading brand for submersible bilge pumps, drawing on 50 years of experience. We are constantly developing new and better solutions to help keep your bilge dry.

Rule Bilge Pumps
Xylem Rule bilge pumps
The Marine Store@Stones Boatyard