JABSCO PAR MAX+WATER SYSTEM PUMP 82400-0294

$305.99

This JABSCO PAR MAX+WATER SYSTEM PUMP 82400-0294 is a 4 gallons per minute (GPM) glass filled polypropylene diaphragm pump with a Santoprene diaphragm, EPDM check valves, 1/2 inch ports, mounted on a 24 Volt DC motor. The JABSCO PAR MAX+WATER SYSTEM PUMP 82400-0294 is self-priming up to 10 feet (3m) and can operate dry without damage. It provides hot or cold water at the turn of a tap, and they’re also flexible enough to produce a full flow or a trickle, according to need.

Out of stock

This JABSCO PAR MAX+WATER SYSTEM PUMP 82400-0294 is a 4 gallons per minute (GPM) glass filled polypropylene diaphragm pump with a Santoprene diaphragm, EPDM check valves, 1/2 inch ports, mounted on a 24 Volt DC motor. The JABSCO PAR MAX+WATER SYSTEM PUMP 82400-0294 is self-priming up to 10 feet (3m) and can operate dry without damage. It provides hot or cold water at the turn of a tap, and they're also flexible enough to produce a full flow or a trickle, according to need.

Description

This JABSCO PAR MAX+WATER SYSTEM PUMP 82400-0294 is a 4 gallons per minute (GPM) glass filled polypropylene diaphragm pump with a Santoprene diaphragm, EPDM check valves, 1/2 inch ports, mounted on a 24 Volt DC motor. The JABSCO PAR MAX+WATER SYSTEM PUMP 82400-0294 is self-priming up to 10 feet (3m) and can operate dry without damage. It provides hot or cold water at the turn of a tap, and they’re also flexible enough to produce a full flow or a trickle, according to need.

The high pressure capability of the new Jabsco PAR-Max Plus series water pressure pumps supplies tremendous flow and consistent water pressure to easily operates the demand of multiple outlets at one time. All PAR-Max Plus models include soft rubber mounts and quick-connect fittings for simplicity of installation. It is produced with mid-sized to larger boats in mind, and supplies a smooth flow and quieter running. This gives a longer life due to its sealed switch design and co-molded diaphragm, which gets rid of leak paths. This pump can service up to five outlets with smooth flow and hassle-free operation.

In addition, the patented PAR-Max Plus co-injected molded diaphragm and larger heavier duty motor brushes significantly prolongs to pump life up to 50 percent longer than existing Jabsco PAR-Max Series diaphragm pumps. It’s manufactured from corrosion resistant materials, capable of dealing the toughest marine environments.

Available in both 12 or 24 volt DC versions, the PAR-Max Plus series water pressure pumps are certified to EN ISO 8846 Marine (Ignition Protection). The pumps are simple, quiet, and easy to preserve.

This pump is not for continuous duty, but for intermittent duty only.

Product Specs :

  • Automatic pressure switch, tested over 4 million cycles without failure.
  • Quick-disconnect ports allow for adjustability and ease of installation.
  • Jabsco’s robust electric diaphragm pump design, proven with over 7 million units in service
  • Quick disconnect ports, allow for ease of installation in hard to reach places
  • Improved noise dampening rubber feet, significantly minimize vibration when mounted against hard surfaces
  • IPX6 rated
  • Certified to EN ISO 8846 Marine .

Notice: Please do not hesitate to ask if it is in stock before purchasing. 

The Marine Store@Stones Boatyard
Stones Boatyard
Jabsco

Additional information

Weight 3.305 kg
Dimensions 32 × 19 × 20.5 cm
More
Our Preferred paint partner
Contact Us
Intouch
Stones Boatyard and The Marine Store
104-1840 Stewart Ave Nanaimo, BC, V9S4E6 Canada
Phone: 1-250-716-9065 Email: info@nanaimoboatyard.ca
Newsletter
© 2024 Nanaimo Boat Yard & Chandlery All rights reserved.